Kiddobloom Stainless Steel Baby Utensils Safety
Product: Kiddobloom Stainless Steel Baby Utensil Set (fork, spoon, baby food pusher)
We, Saku LLC, declare that the above designated product is in conformity with the following CPSC product safety regulation, as applicable:
- 15 U.S.C. 1278a children’s products containing lead
- 16 CFR 1500.48 sharp points
- 16 CFR 1500.49 sharp edges
- 16 CFR 1501 small parts
- 16 CFR 1303/ Consumer Product Safety Improvement Act 0f 2008/ CPSC-CH-E1001-08.3/CPSC-CH-E1002-08.3 total lead in substrate
- Washington Children’s Safe Products Act (CSPA)-RCW Chapter 70.240.020/CPSC-CH-E1001-08.3 (Mod)/CPSC-CH-E1002-08.3 (Mod)/CPSD-AN-00185-MTHD/CPSD-AN-00196-MTHD total cadmium in substrate
- 16 CFR 1500.3 (c) (6) (vi) / 16 CFR 1500.44 flammability
- 21 CFR 182: FDA GRAS evaluation
- P. and L Act (16 CFR 500) or NIST Uniform Laws and Regulations Handbook 130 Packaging and Labeling
- 19 CFR 134 country of origin marking
- CPSIA 103 tracking label for children’s products
- Model Toxics in Packaging Legislation of the Toxics in Packaging Clearinghouse (TPCH) heavy metals in packaging
Below are some of the results that we would like to share with you. Before reading through the testings, please read the following explanation about detection limit used in testing labs.
Note:
To understand the test result, we need to understand detection limit used in testing labs. There is no zero detection limit, so the labs will set the detection limit to greater than zero on the testing equipment. For example: lead testing with a 10 ppm detection limit and <10 ppm testing result means there possibly is zero to less than 10 ppm of lead in the stainless steel. If the existence of zero lead can not be proven due to the detection limit used in the labs, then no one can claim a product as "lead free" .
Total lead in substrate in a non surface coating product
Kiddobloom utensils do not have surface coating.
Test method: U.S CPSC-CH-E1001-8.1 (June 12, 2010)
Detection limit: 10 ppm
Result: < 10 ppm
Total cadmium in substrate in a non surface coating product
Test method: CPSC-CH-E1001-08.3 /CPSC-CH-E1002-08.3/ CPSD-AN-00185-MTHD/CPSD-AN-00196-MTHD
Detection limit: 10 ppm
Result: < 10 ppm
FDA GRAS: stainless steel AISI #304 confirmation
Accessible sharp points and edges